1.     

Komanduri, R., Stewart, V.A., and R.H. Brown, "Dynamic Calibration of Dynamometers," Annals of CIRP 19 (1971) 231

     2.     

Komanduri, R., "Some Aspects of Machining with Negative Rake Tools Simulating Grinding," Int. J. of Mach. Tool Des. Res., 11, (1971) 223

     3.     

Komanduri, R., "Chip Segmentation:  An Experimental Study with the Aid of High Speed Photography," Proc. Harold Armstrong Conference on Production Engineering, Melbourne, Australia (1971) 322

     4.     

Komanduri, R. and R.H. Brown, "The Formation of Microcracks in Machining a Low Carbon Steel," Metals and Materials, 1 (1972) 531

     5.     

Brown, R.H. and R. Komanduri, "An Investigation on the Performance of a Quick-Stop Device for Metal Cutting Studies," Proc. of the 13th Mach. Tool Des. Res. Conference, U.K. (1972)

     6.     

Brecker, J.N., Komanduri, R., and M. C. Shaw, "Evaluation of Unbonded Abrasive Grains," Annals of CIP 22/2 (1973) 219

     7.     

Komanduri, R. and M. C. Shaw, "Scanning Electron Microscope Study of Surface Characteristics of Abrasive Materials," Trans ASME, J. of Engg. Mat. and Tech. (1974) 145

     8.     

Komanduri, R. and M. C. Shaw, "Surface Morphology of Synthetic Diamonds and Cubic Boron Nitride," Int. J. of Mach. Tool Des. Res., 14, (1974) 63

     9.     

Komanduri, R. and M. C. Shaw, "New Method of Nucleating Diamonds," Nature 248, No. 5449 (April 12, 1974) 582

   10.     

Komanduri, R. and M. C. Shaw, "A Technique for Investigating the Surface Features of a Grinding Wheel," Annals of CIRP 23/1 (1974) 95

   11.     

Komanduri, R., "Characterization of Manufactured Diamond," Proc. of the Third International Industrial Diamond Symposium, Washington, DC (1974) 175

   12.     

Komanduri, R. and M. C. Shaw, "On the Grindability of an AISI T-15 Tool Steel Produced by the Consolidation of Atomized Powder," Proc. of the Third North American Metal Working Conference (May 1975)

   13.     

Komanduri, R. and M. C. Shaw, "Wear of Synthetic Diamond in Grinding Ferrous Metals," Nature 255 (May 15, 1975) 211

   14.     

Komanduri, R. and M. C. Shaw, "Galling Wear of Materials at High Speed Sliding Contact," Wear 33, No. 2 (1975) 283

   15.     

Komanduri, R. and M. C. Shaw, "Formation of Spherical Particles in Grinding," Philosophical Magazine 32, No. 4 (October 1975) 711

   16.     

Komanduri, R. and M. C. Shaw, "Attritious Wear of Silicon Carbide Abrasive," Trans ASME, J. of Engg. for Ind. 98, (Nov, 1976) 1125

   17.     

Komanduri, R. and M. C. Shaw, "Wear of Silicon Carbide in High-Speed Sliding," Wear 36, (1976) 363

   18.     

Komanduri, R., "The Mechanism of Metal Build-up on Aluminum Oxide Abrasive," Annals of CIRP 25/1 (1976) 191

   19.     

Komanduri, R., Lakshmipathy, S., and M. C. Shaw, "Role of Spherical Particles as Friction Reducers in Sliding Contact," Wear 39 (1976) 191

   20.     

Komanduri, R. and M. C. Shaw, "On the Diffusion Wear of Diamond in Grinding Pure Iron," Philosophical Magazine 34 (1976) 195

   21.     

Komanduri, R., "On the Corrosive Wear of Cemented Carbide Can Ironing Punches," Proc. of the 1976 Int. Conf. on Hard Material Tool Technology, Carnegie-Mellon University, Pittsburgh, PA.  Also, Carbide Journal (Nov.-Dec. 1976) 3

   22.     

Shaw, M. C. and R. Komanduri, "Brittle Fracture Under Normal Stress," Proc. of the 4th Int. Conf. on Fracture, Waterloo, Canada, June 19-24, 1977

   23.     

Komanduri, R. and M. C. Shaw, "A Mechanism for the Accelerated Wear of High Speed Sliding Surfaces in Presence of Spherical Particles," Wear 42 (1977) 177

   24.     

Komanduri, R., Laverty, W.F., and M. C. Shaw, "Wear of Abrasives in Simulated Hot Grinding," Proc. of the Int. Conf. on Wear of Materials, St. Louis (April 1977) 475 (also in Trans ASME J. of Lub. Tech 99 (October 1977) 415

   25.     

Stelson, T., Komanduri, R., and M. C. Shaw, "Manual Adaptive Control," Proc. of the Int. Conf. on Automation, sponsored by the Int. Inst. for Prod. Engg. Res. (CIRP) Paris (Sept. 1976)

   26.     

Shaw, M. C. and R. Komanduri, "Manual Adaptive Control," American Machinist (May 1977)

   27.     

Stelson, T., Komanduri, R., and M. C. Shaw, "Manual Adaptive Control of a Centerless Grinding Operation," Proc. the 4th Int. Conf. on Production Research, Tokyo, Japan (August 22-30, 1977)

   28.     

Shaw, M. C. and R. Komanduri, "The Role of Stylus Curvature in Grinding Wheel Surface Characterization," Annals of CIRP 26/1 (1977) 139

   29.     

Shirakashi, T., Komanduri, R., and M. C. Shaw, "The Conflicting Roles of Carbontetrachloride as a Boundary Lubricant," Trans ASME, J. of Engg. of Ind. 100 (1978) 244

   30.     

Shirakashi, T., Komanduri, R., and M. C. Shaw, "On Friction and Metal Transfer of Sliding Surfaces Undergoing Subsurface Plastic Deformation," Wear 48 (1978) 191

   31.     

Komanduri, R. and W. R. Reed, Jr., "A New Technique of Dressing and Conditioning Resin Bonded Superabrasive Grinding Wheels," Annals of CIRP 29/1 (1980) 239

   32.     

Komanduri, R., Hayashi, S. R., Fielding, J. O., and R. Bolon, "A Specimen Stage for in situ Orthogonal Machining Studies Inside the SEM," GE CRD Report No. 80CRD071, May 1980

   33.     

Komanduri, R. and R. H. Brown, "On the Mechanics of Chip Segmentation in Machining," Trans ASME, J. of Engg. for Ind. 103 (1981) 33

   34.     

Komanduri, R. and B. F. von Turkovich, "New Observations on the Mechanism of Chip Formation When Machining a Titanium Alloy," Wear 69 (1981) 179

   35.     

Komanduri, R. and J. Hazra, "A Metallurgical Investigation of Chip Morphology in Machining an AISI 1045 Steel at Various Speeds up to 10,000 SFPM," Proc. of the IX NAMRC (1981) 356

   36.     

Flom, D.G., Komanduri, R. and M. Lee, "Review of Prior Work in High Sped Machining," Proc. of the Symposium on Advanced Processing Methods for Titanium, Metallurgical Society of AIME Conference, October 13-15, 1981, Louisville, KY

   37.     

Komanduri, R., Hazra, J., Schroeder, T. A., von Turkovich, B. F., and D. G. Flom, "On the Catastrophic Shear Instability in High Speed Machining of an AISI 4340 Steel," Trans ASME, J. of Engg. for Ind. 104 (May 1982) 121

   38.     

Komanduri, R., "Some Clarifications on the Mechanics of Chip Formation When Machining Titanium Alloys," Wear 76 (1982) 15

   39.     

Komanduri, R., Bandhopadhyay, D. K., Schroeder, T. A., and J. Hazra, "Titanium:  A Model Material for Analyzing Chip Formation in High-Speed Machining," Proc. of the Symposium on Advanced Processing Methods for Titanium, Metallurgical Society of AIME Conference, October 13-15, 1981, Louisville, KY.

   40.     

Komanduri, R., "Tool Materials," Encyclopedia of Materials Science and Engineering.  Editor-in-Chief:  Michael B. Bever, published by Pergamon Press, U.K. (1982) 

   41.     

Komanduri, R., "High Removal Rate Machining Tests on Inconel 718 and Titanium 6A1-4V," Advanced Machining Research Program (AMRP) Annual Technical Report (SRD-8-070) dated 16 August 1982

   42.     

Komanduri, R., "On High Speed Machining Models," Advanced Machining Research Program (AMRP) Semiannual Technical Report (SRD-82-037) dated 15 February 1982

   43.     

Hayashi, S. R., Komanduri, R., and W. Reed, Jr., "A Microscopic Examination of End Mill Failure Modes During Simulated Entry and Exit Tests on Titanium," Manufacturing Technology for Advanced Metal Removal Initiative (AMRI) Interim Technical Report (SRD-82-027) 20 April 1982

   44.     

Komanduri, R. and W. Reed, Jr., "High Speed Face Milling of a Titanium Alloy (Ti 6-2-4-2) with Integral Ledge Tools," Technology for Advanced Metal Removal Initiatives (AMRI) Interim Technical Report (SRD-82-083) (20 Oct. 1982)

   45.     

Komanduri, R. and W. Reed, Jr., "Evaluation of Carbide Grades and New Cutting Tool Geometry for Machining Titanium Alloys," Wear 92 (1983) 113

   46.     

Komanduri, R. and J. Desai, "Cutting Tool Materials," invited review article for the Encyclopedia of Chemical Technology (Third Edition). Edited by Martin Grayson and Published by John Wiley & Sons. Also in Carbide and Tool Journal 15 No. 4 (1983)

   47.     

Komanduri, R., "On High Speed Machining Models," Final Report on the DARPA Advanced Machining Research Program (1984)

   48.     

Flom, D.G., Komanduri, R., and M. Lee, "High Speed Machining of Metals," Annual Review of Materials Science 14 (1984) 231. 

   49.     

Komanduri, R. and W. Reed, Jr., "Rotary Tool Machining," Final Report on the DARPA Advanced Machining Research Program (1984)

   50.     

Komanduri, R. and M. Lee, "Ledge Tool:  A New Cutting Tool Insert," Trans ASME J. of Eng. for Ind. 107 (May 1985) 99.  Also in Int. J. of Refractory and Hard Metals 4 (Dec. 1984) 180

   51.     

Komanduri, R. and S. Ferguson, "On the Frequency of Force Excitation When Machining Titanium Alloys," Final Report on the DARPA Advanced Machining Research Program (1984)

   52.     

Ferguson, S. and R. Komanduri, "Factors Influencing the Shear-Localized Chip Formation Process in Machining of an AISI 4140 Steel," Final Report on the DARPA Advanced Machining Research Program (1984)

   53.     

Konig, W., Komanduri, R., Tonshoff, H.K., and G. Ackershott, "Machining of Hard Materials," Annual of CIRP 33/2 (1984) 417

   54.     

Komanduri, R., "On the Substitution in the U.S. of Ceramic Tools for Conventional Cutting Tools Containing Strategic Minerals W, Ta, and Co." Int. J. of Materials and Society 8 No. 2 (1984) 271.  Also in Int. J. of Refractory and Hard Metals 4 No. 3 (Dec. 1985)

   55.     

Komanduri, R., McGee, F.J., Thompson, R.A., Covy, J.P., Truncale, J.F., Tipnis, V.A., Stach, R.M., and R.I. King, "On a Methodology for Establishing the Machine Tool System Requirements for High-Speed/High Productivity Machining," Trans ASME J. of Eng. for Ind. 107, No. 4 (Nov. 1985) 316. 

   56.     

Komanduri, R., Flom, D. G., and M. Lee, "Highlights of the DARPA Advanced Machining Research Program," Trans ASME, J. of Eng. for Ind. 107 (1985) 325

   57.     

Komanduri, R., "High Speed Machining," ASME Mechanical Engineering 107, No. 12 (1985) 64. 

   58.     

Komanduri, R. and J. Desai, "Tool Materials” Concise Encyclopedia of Chemical Technology, John Wiley & Sons, NY. Volume 16, 3rd Edn. (1985) 1192

   59.     

Komanduri, R. and T.A. Schroeder, "Shear Instability in Machining a Nickel Iron-Base Superalloy," Trans ASME J. of Eng. for Ind. 108 (May 1986) 93

   60.     

Komanduri, R., "On the Machining of Difficult-to-Machine Materials," Proc. of the 2nd Int. Machine Tool Engineers Conference, Kobe Japan (1986)

   61.     

Komanduri, R., "Advanced Ceramic Tool Materials for Machining," Int. J. of Refractory Metals and Hard Materials, 8, No. 2 (June 1989) 125-132.

   62.     

Komanduri, R. and J. Larsen-Basse, "Tribology: The Cutting Edge," ASME Mechanical Engineering, 111, No. 1 (January 1989) 74-79

   63.     

Komanduri, R. and S. K. Samanta, "Ceramics," in Metals Handbook, Vol.16, Machining, 9th Edition, ASM Int., Metals Park, OH (1989) 98-104

   64.     

Komanduri, R., Snail, K. A. and L. L. Fehrenbacher, "Growth of Diamond Crystals by Combustion Synthesis," Philosophical Magazine Letters, 62  (1990) 283-290.

   65.     

Komanduri, R., Fehrenbacher, L. L., Hanssen, L. M., Morrish, A. M., Snail, K. A., Thorpe, T., Butler, J. E., and B. A. Rath, "Polycrystalline Diamond Films and Single Crystal Diamonds Grown by Combustion Synthesis," Annals of CIRP, 39/1 (1990) 585-588.

   66.     

Lucca, D. A., Rhorer, R. L. and R. Komanduri, "Energy Dissipation in the Ultra-Precision Machining of Copper," Annals of CIRP 40/1 (1991) 69-72

   67.     

Ikawa, N., Donaldson, R., Komanduri, R., Konig, W., McKeown, P.A., Moriwaki, T. and I. Stowers, "Ultraprecision Metal Cutting- The Past, the Present, and the Future," Annals of CIRP. 40/2, (1991) 587-594

   68.     

Komanduri, R. and S. Nandyal, "Low Pressure Synthesis of Polycrystalline Diamond Abrasive," Int. J of Machine Tools and Manufacturing, 33 (1993) 285-296

   69.     

Komanduri, R., Merchant, M.E., and M. C. Shaw, "Symposium on the U. S. Contributions to Machining and Grinding Research in the 20th Century," ASME Applied Mechanics Review 46 (1993) 70-132

   70.     

Komanduri, R., "Machining and Grinding - A Historical Review of Classical Papers," ASME Applied Mechanics Review 46 (1993) 80-132

   71.     

Komanduri, R., "Machining of Fiber-Reinforced Composites," ASME Mechanical Engineering (April 1993) 58-64.

   72.     

Noori-Khajavi, A and R. Komanduri, "On Multi-Sensor Approach To Drill Wear Monitoring," Annals of CIRP 42/1 (1993) 71-74

   73.     

Bang, K., Ghajar, A.J., and R. Komanduri, "The Effect of Substrate Surface Temperature on Morphology and Quality of Diamond Films by Oxyacetylene Combustion Method," J. of Thin Films 238 (1993) 172-183

   74.     

Komanduri, R., "Low-Pressure Diamond Synthesis for Manufacturing Applications," Keynote paper at the 6th International Manufacturing Conference with China (ICMC), Hong Kong, March 10, 1993

   75.     

Komanduri, R. and D.G. Flom, "Tribology in High-Speed Machining," a Chapter in CRC Handbook of Lubrication and Tribology, CRC Press, NY (1994) 423-441

   76.     

Fox, M., Agarwal, K, Noori-Khajavi, A., Shinmura, T. and R. Komanduri, "Magnetic Abrasive Finishing of Non-Magnetic Stainless Steel Rods," Annals of CIRP 43/1 (1994) 181-184

   77.     

Komanduri, R. and T. R. Ramamohan, "On the Mechanisms of Material Removal in Fine Grinding and Polishing of Advanced Ceramics and Glasses," Keynote paper presented at the International Conference on Production Engineering Research, Chiba, Japan (October 1994) JSPE Publication Series No. I Advancement of Intelligent Production, Edited by E. Usui, published by Elsevier (1994) k-38 to k-51

   78.     

Komanduri, R., "Advanced Ceramic Cutting Tools", a Chapter in Friction and Wear of Ceramics, edited by S. Jahanmir, Marcel Dekker, Inc. NY (1994)

   79.     

Komanduri, R. and D. G. Flom, “Tribology in High-Speed Machining,” a Chapter in CRC Handbook of Lubrication and Tribology, CRC Press, NY (1994) 423-441

   80.     

Bhatnagar, N., Ramakrishnan, N., Naik, N. K., and R. Komanduri, "On Machining of Fiber Reinforced (FRP) Composite Laminates,” Int. J Mach. Tool. Manufacturing, 35 (1995) 701-716

   81.     

Noori-Khajavi, A and Komanduri, R., "Frequency and Time Domain Analyses of Sensor Signals in Drilling. Part I Correlation with Drill Wear," Int. J. of Mach. Tools and Manufacturing, 35 (1995) 775-793

   82.     

Noori-Khajavi, A and Komanduri, R., "Frequency and Time Domain Analyses of Sensor Signals in Drilling. Part II Investigation on the Problems Associated with Sensor Integration," Int. J. of Mach. Tools and Manufacturing 35 (1995) 795-815      

   83.     

Zhen Bing Hou and R. Komanduri, "On a Thermo-Mechanical Model of Shear Instability in Machining," Annals of CIRP, 44/1 (1995) 69-74

   84.     

Komanduri, R. and Z. B. Hou, "Mechanics of Chip Formation in High Speed Machining," Keynote Paper at the Industrial Tooling Conference, Southampton, U. K. (September 1995)

   85.     

Umehara, N. and R. Komanduri, "Magnetic Fluid Grinding of HIP-Si3N4 Rollers," Wear 192 (1995) 85-93

   86.     

Komanduri, R., Raghunandan, M., and N. Umehara, "On the Possibility of Chemo-Mechanical Polishing of Silicon Nitride by Magnetic Float Polishing," Trans ASME, J of Tribology, 118 (1996) 721-727

   87.     

Bhagavatula, S. R. and R. Komanduri, "On Chemo-Mechanical Polishing of Silicon Nitride with Chromium Oxide Abrasive," Philosophical Magazine A 74 (1996) 1003-1017

   88.     

Komanduri, R., "On Material Removal Mechanisms in Finishing of Advanced Ceramics and Glasses," Annals of CIRP 45/1 (1996) 509-514

   89.     

Raghunandan, M., Umehara, N., Noori-Khajavi, A., and R. Komanduri, "Magnetic Float Polishing of Ceramics," Trans ASME, J of Manufacturing Science & Engineering 119 (1997) 520-528

   90.     

Zhen Bing Hou and R. Komanduri, "Modeling of Thermo-Mechanical Shear Instability in Machining," Int. J. of Mechanical Sciences, 9 (1997) 1273-1314

   91.     

Chandrasekaran, N., Noori-Khajavi, A., Raff, L. M., and R. Komanduri, "A New Method for MD Simulation of Nanometric Cutting," Philosophical Magazine 77 (1997) 7-26

   92.     

Kustas. F., Fehrenbacher, L. L. and R. Komanduri, "Nanocoatings for Dry Machining," Annals of CIRP 46/1 (1997) 39-42

   93.     

Komanduri, R., "Advanced Ceramic Cutting Tools", a Chapter in Friction and Wear of Ceramics, edited by S. Jahanmir, Marcel Dekker, Inc. NY (1994)

   94.     

Komanduri, R., "Machining of Fiber-Reinforced Composites," J of Machining Science and Technology, 1(1) (1997) 113-151

   95.     

Jagannadham, K., Fan, N. D., Komanduri, R., and J. Narayan, "Comparison of Microstructural Features of Diamond Composite Coatings with Poly-crystalline Diamond or Boron Nitride Brazed on Tungsten Carbide Tools," J of Vacuum Science Technology, A 15  (1997) 2262-22

   96.     

Komanduri, R., Lucca, D. A., and Y. Tani, "Technological Advances in Fine Abrasive Processes," Annals of CIRP 46/2 (1997) 545-596

   97.     

Ming Jiang and R. Komanduri, "Application of Taguchi Method for Optimization of Finishing Conditions in Magnetic Float Polishing (MFP)," Wear 213  (1997) 59-71

   98.     

Komanduri, R., Chandrasekaran, N., and L. Raff, "Effect of Tool Geometry in Nanometric Cutting: An MD Simulation Approach," Wear 218 (1998) 84-97

   99.     

Ming Jiang and R. Komanduri, "On the Finishing of Si3N4 Balls for Bearing Applications," Wear 215 (1998) 267-278

100.     

Ming Jiang, Wood, N. O., and R. Komanduri, "On the Chemo-Mechanical Polishing of Si3N4 Bearing Balls with CeO2," Trans ASME, J of Engineering Materials & Technology, 120 (1998) 304-312

101.     

Ming Jiang, Wood, N. O., and R. Komanduri, "On the Chemo-Mechanical Polishing of Si3N4 Bearing Balls with Various Abrasives" Wear 220 (1998) 59-71

102.     

Komanduri, R., "Tool Materials," Concise Encyclopedia of Chemical Technology, John Wiley & Sons Inc., (1998) 2027-2031

103.     

Raghunandan, M. and R. Komanduri, "Finishing of Silicon Nitride Balls for High-Speed Bearing Applications," Trans ASME, J. of Manufacturing Science & Engineering 120 (1998) 376-386.

104.     

Matossian, J., Wei, R., Vajo, J., Hunt, G., Gardos, M., Chambers, G., Soucy, L., Oliver, D., Jay, L., Komanduri, R., and A. Perry, "Plasma-Enhanced, Magnetron-Sputtered Deposition (PMD) of Materials," Surface & Coatings Technology, 108-109 (1998) 496-50

105.     

Zhen Bing Hou and R. Komanduri, "On the Thermal Aspects of the Magnetic Field Assisted Polishing of Ceramics, Part I. Thermal Model," Trans ASME, J of Tribology 120 (1998) 645-651

106.     

Zhen Bing Hou and R. Komanduri, "On the Thermal Aspects of the Magnetic Field Assisted Polishing of Ceramics, Part II. Thermal Aspects of Magnetic Float Polishing (MFP) of Ceramic Balls," Trans ASME, J of Tribology 120 (1998) 652-659

107.     

Zhen Bing Hou and R. Komanduri, "On the Thermal Aspects of the Magnetic Field Assisted Polishing of Ceramics, Part III. Thermal Aspects of Magnetic Abrasive Finishing (MAF) of Ceramic Rollers," Trans ASME, J of Tribology 120 (1998) 660-667

108.     

Komanduri, R. and Ming Jiang, "A New Polishing Technology for Finishing Advanced Ceramic Balls for Hybrid Bearings," Abrasives Magazine (1999) 8-20

109.     

Mallika, K. and R. Komanduri, "Low Pressure Microwave CVD Diamond Coatings on Cemented Tungsten Carbide Tools," Wear 224  (1999) 245-266

110.     

Mallika, K., DeVries, R. C., and R. Komanduri, "On the Low Pressure Transformation of Graphite to Diamond in the Presence of a 'Catalyst-Solvent’," Thin Solid Films 339  (1999) 19-33

111.     

Mallika, K., Ramamohan, T., Jagannadham, K., and R. Komanduri, "On the Growth of Polycrystalline Diamond on Transition Metals by Microwave Plasma Assisted CVD," Philosophical Magazine B 79  (1999) 593-624

112.     

Komanduri, R., Hou, Z. B., Umehara, N., Raghunandan, M., Ming Jiang, Bhagavatula, S. R., Noori-Khajavi, A., and N. O. Wood, "A 'Gentle' Method for Finishing Si3N4 Balls for Hybrid Bearing Applications," Tribology Letters 7 (1999) 39-49

113.     

Komanduri, R. and L. M. Raff, "Molecular Dynamics (MD) Simulation of Machining," Proc. of the U.S.-Japan Symposium on High-Efficiency, Damage-free Finishing of Advanced Materials," Oklahoma State University, March 25-26, 1999, pp 152-208

114.     

Komanduri, R. and T. Shirakashi (editors), "New Developments in the Finishing of Advanced Materials," Proc. of the U.S.-Japan Symposium on High-Efficiency, Damage-free Finishing of Advanced Materials," Oklahoma State University, March 25-26, 1999

115.     

Komanduri, R. and Z. B. Hou, "Thermal Modeling of the Metal Cutting Process," Proc. of the U.S.-Japan Symposium on High-Efficiency, Damage-free Finishing of Advanced Materials," Oklahoma State University, March 25-26, 1999, pp. 209-244

116.     

Komanduri, R., Umehara, N., Raghunandan, M., Jiang, M., Hou, Z. B., Bhagavatula, S., Noori-Khajavi, A., and N. Wood, "A Gentle Method for Finishing of Silicon Nitride Balls for Hybrid Bearing Applications," Proc. of the U.S.-Japan Symposium on High-Efficiency, Damage-free Finishing of Advanced Materials," Oklahoma State University, March 25-26, 1999, pp. 133-152

117.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "Orientation Effects in Nanometric Cutting of Single Crystal Materials: An MD simulation Approach," Annals of CIRP 48/1 (1999) 67-72

118.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "Some Aspects of Machining with Negative Rake Tools Simulating Grinding: An MD Simulation Approach," Philosophical Magazine B 79 (1999) 995-968

119.     

Komanduri, R., and L. M. Raff, "MD Simulation of Nanometric Cutting and Tribology," NSF Grantees Meeting, Vancouer, BC, January 2000

120.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "MD Simulation of Indentation and Scratching of Single Crystal Aluminum," Wear 240 (2000) 113-143

121.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "MD Simulation of Single Crystal Aluminum - Effect of Crystal Orientation and Direction of Cutting," Wear 242 (2000) 60-88

122.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "MD Simulation of Atomic Scale Friction," Physical Review B 61 (2000) 14007-14019

123.     

Zhen Bing Hou and R. Komanduri, "General Solutions for Stationary/Moving the Plane Heat Source Problems in Manufacturing and Tribology” Int. J of Heat & Mass Transfer 43 (2000) 1679-1698

124.     

Komanduri, R. and Z. B. Hou, "Themal Modeling of the Metal Cutting Process, Part I - Temperature Rise Distribution due to Shear Plane Heat Source," Int. J of Mechanical Sciences 42 (2000) 1715-1752

125.     

Komanduri, R. and Z. B. Hou, "Themal Modeling of the Metal Cutting Process, Part II - Temperature Rise Distribution due to Frictional Heat Source at the Chip-Tool Interface," Int. J of Mechanical Sciences 43 (2001) 57-88

126.     

Komanduri, R. and Z. B. Hou,”Thermal Modeling of the Metal Cutting Process – Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool-chip interface frictional heat source,” Int J of Mechanical Sciences 43 (2001) 89-107

127.     

Yan. J., Yoshino, M., Kuriagawa, T., Shirakashi, T., Syoji, K. and R. Komanduri, "On the Ductile Machining of Silicon for Micro Electro Mechanical (MEMS), Opto-electronic and Optical Applications," Materials Science and Engineering, B 297/1-2 (2000) 230-234

128.     

Komanduri, R. and Z. B. Hou, "Thermal Analysis of the Arc Welding Process: Part I General Solutions," Metallurgical and Materials Transactions 31B  (2000) 1353-1370

129.     

Komanduri, R. and Z. B. Hou, "On the Physics of High Speed Machining," Invited paper presented at the conferences organized by the U. K. Machine Tool Technology Association in Loughborough and Birmingham, U.K. (2000)

130.     

Komanduri, R. and Z. B. Hou, "Tribology in Metal Cutting: Some Thermal Issues," Trans ASME J of Tribology 123 (2000) 799-815

131.     

Komanduri, R., "Magnetic Field Assisted Polishing,” Final Report, Army Research Office, Raleigh-Durham (2000)

132.     

Komanduri, R. and Z. B. Hou, "Thermal Analysis of the Arc Welding Process: Part II Effect of Variation of Thermo-Physical Properties with Temperature," Metallurgical and Materials Transactions 32B (2001) 483-499

133.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "MD Simulation of Exit Failure in Nanometric Cutting," Material Science and Engineering, A 311 (2001) 1-12

134.     

Komanduri, R. and Z. B. Hou, "Thermal Analysis of Dry Sleeve Bearings - A Comparison Between Analytical, Numerical (FEM), and Experimental Results," Tribology International 34 (2001) 145-160

135.     

Mallika, K. and R. Komanduri, "Low Pressure Microwave CVD Diamond Coatings on Silicon Nitride Tools," Thin Solid Films 396 (2001) 145-165

136.     

Komanduri, R. and Z. B. Hou, "A Review of the Experimental Techniques for the Measurement of Heat and Temperatures Generated in Some Manufacturing Processes and Tribology," Tribology International 34 (2001) 653-682

137.     

Yoshino, M., Aoki, T., Chandrasekaran, N., Shirakashi, T., and R. Komanduri,” Finite Element Simulation of Plane Strain Plastic-Elastic Indentation on Single Crystal Silicon,” Int. J of Mechanical Sciences 43 (2001) 313-333

138.     

Yoshino, M., Aoki, T., Shirakashi, T and R. Komanduri, "Some Experiments on the Scratching of Silicon: In Situ Scratching inside an SEM and Scratching Under High External Hydrostatic Pressures,” Int. J of Mechanical Sciences 43 (2001) 335-347

139.     

Komanduri, R., "Proposal for a New Course on the Thermal Aspects of Manufacturing,” Guest Editorial, Heat Transfer Engineering 22 (2001) 1-3

140.     

Komanduri, R., "Cutting Tool Materials," Encyclopedia of Materials: Science and Engineering, published by Elsevier Science Ltd. (U.K.) (2001) 1940-1953

141.     

Komanduri, R. and S. Iyengar, "Abrasives," Encyclopedia of Materials: Science and Engineering, published by Elsevier Science Ltd. (U.K.) (2001) 1629-52

142.     

Komanduri R., and Z. B. Hou, "High Speed Machining of Some Difficult-to-Machine Materials," NSF Grantees Meeting, Tampa, Florida, January 2001

143.     

Komanduri, R. and Z. B. Hou, "On the Thermal Analysis of Manufacturing Processes,” Invited Keynote paper presented at the 16^th Brazilian Congress of Mechanical Engineering 20 (2001) 153-177

144.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "Molecular Dynamics Simulation of Uniaxial Tension of Some Single Crystal Cubic Metals at Nanolevel,” Int. J of Mechanical Sciences 43 (2001) 2237-2260

145.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, "Molecular Dynamics Simulation of the Nanometric Cutting of Silicon,” Philosophical Magazine B 81 (2001) 1989-2019

146.     

Komanduri, R., and Z. B. Hou, "Thermal Analysis of the Laser Surface Transformation Hardening Process,” Int. J of Heat and Mass Transfer 44 (2001) 2845-2862

147.     

Komanduri, R. and L. M. Raff, “On the Simulation of Machining at the Atomic Scale,” Proc of the 3^rd Int. Conference on Metal Cutting and High-Speed Machining Conference, Metz, France July 27-29, 2001

148.     

Komanduri, R., ”Novel Nanocoatings on Cutting Tools for Dry Machining,” Final Report to the Environmental Protection Agency (EPA) on Technology for Sustainable Environment, September 30, 2001

149.     

Komanduri, R. and F. F. Ling, ”Report on the Workshop on Nanotechnology Experimentation and Testing (NEXT),” National Science Foundation, Arlington, VA (2001)

150.     

Komanduri, R. and L. M. Raff, "A Review on the Molecular Dynamics (MD) Simulation of Machining," Proc. of the I. Mech. E. (Lon) 215 B (2001) 1639-1672

151.     

Komanduri, R., and Z. B. Hou, “Analysis of Heat Partition and Temperature Distribution in Sliding Systems,” Wear 251 (2001) 925-938

152.     

Komanduri R. and F. F. Ling, “NSF Report on the Workshop on Nanotechnology Experimentation and Testing (NEXT),” National Science Foundation, Arlington, VA (Feb 2001)

153.     

Flom, D. G. and R. Komanduri, "Some Indentation and Sliding Experiments on Single Crystal and Polycrystalline Materials,” Wear 252 (2002) 401-429

154.     

Komanduri, R., L. M. Raff, and A. Chandrasekaran, “A Combined Monte Carlo-Damped Trajectory Simulation of Nanometric Testing of FCC Metals Under Uniaxial Tension,” Philosophical Magazine Letters 82 (2002) 247-256

155.     

Komanduri, R. and Z. B. Hou, “On Thermoplastic Shear Instability in the Machining of a Titanium Alloy (Ti-6Al-4V),” Metallurgical and Materials Transactions 33 A (2002) 2995-3010

156.     

Biscarini, F., Taliani, C., Chen, J., and R. Komanduri, “Nanomanufacturing and Processing – Research, Education, Infrastructure, Security, Resources,” Trans ASME, J of Manufacturing Science and Engineering, 124 (2002) 489-90

157.     

Komanduri, R., Chandrasekaran, N., and L. M. Raff, “MD Simulations of Uniaxial Tension at Nanoscale of Semiconductor Materials for MEMS Applications,” Materials Science and Engineering A 340 (2003) 58-67

158.     

Ming Jiang, Hao, S., and R.  Komanduri, “On the Advanced Lapping Process in the Precision Finishing of Thin Film Magnetic Recording Heads for Rigid Disc Drives,” Applied Physics A 77 (2003) 923-932

159.     

Hou, Z. B. and R. Komanduri, “On the Mechanics of the Grinding Process- Part 1 Stochastic Nature of the Grinding Process,” Int. J of Machine Tools and Manufacturing, 43 (2003) 1579-1593

160.     

Komanduri, R., Raff, L. M., and R. Narulkar, “Monte Carlo Simulation of Nanometric Cutting,” Philosophical Magazine 84 (2003) 1155-1183

161.     

Choo, L., Ogawa, Y., Kanbargi, G., Raff, L. M., and R. Komanduri, “Micromachining of Silicon by Short Pulse Laser Ablation in Air and Under Water,” Material Science and Engineering A 372 (2003) 145-162

162.     

Komanduri R., ”NSF Workshop Report on the Research Needs in the Thermal Aspects of Various Material Removal Processes,” Oklahoma State University, Stillwater, OK  (June 10-12, 2003)

163.     

Komanduri, R., and Z. B. Hou, "Thermal Analysis of the Laser Surface Transformation Hardening - Optimization of Process Parameters,” Int. J of Machine Tools and Manufacturing 44 (2004) 991-1008

164.     

Chandrasekaran, N., Stokes, D., Raff, L. M., and R. Komanduri, "Molecular Dynamics (MD) Simulation of Milling,” to be submitted for publication (2004)

165.     

Komanduri, R., M. Lee, and L. M. Raff, “The Significance of Normal Rake in Oblique Machining,” Int. J of Machine Tools and Manufacturing 44 (2004) 1115-1124

166.     

Hou, Z. B. and R. Komanduri, ”On the Mechanics of the Grinding Process- Part 2 Thermal Aspects of Fine Grinding Process,” Int. J of Machine Tools and Manufacturing 44 (2004) 247-270

167.     

Hou, Z. B. and R. Komanduri, “On the Mechanics of the Grinding Process- Part 3 Thermal Aspects of the Abrasive Cut-off Process,” Int. J of Machine Tools and Manufacturing 44 (2004) 271-289

168.     

Komanduri R., “Monte Carlo Simulation of Nanometric Cutting,” NSF Annual Report, Dallas, TX (2004)

169.     

Verghese, S., and R. Komanduri, “Nanoindentation and Nanoscratching of Thin Films on Silicon Wafer Using AFM and Nanoindenter,” 2nd Progress Report to Micron Foundation (2004)

170.     

Verghese, S. and R. Komanduri, “Nanoindentation and Nanoscratching of Thin Films of Aluminum on Silicon Wafer Using AFM and Nanoindenter,” 2nd Progress Report to Micron Foundation (2004)

171.     

Wang, B., Karuppiah, V., Lu, H., Roy, S., and R. Komanduri, “Two-Dimensional Mixed Mode Crack Simulation Using the Material Point Method,” Mechanics of Advanced Materials and Structures 12 (2005) 471-484

172.     

Narulkar, R., Raff, L. M., and R. Komanduri, “Monte Carlo-Steepest Descent (MC-SD) Simulations of Nanometric Cutting,” I. Mech. E.(London), Part N, J of Nanoengineering and Nano Systems, 218 (2005) 7-16

173.     

Ma, J., Lu., H., Wang, B., Roy, S.,  Hornung, R., Wissink, A., and R. Komanduri, “Multiscale Simulations Using Generalized Interpolation Material Point Method (GIMPMP) and AMARAI Parallel Processing,” Computer Modeling in Engineering & Sciences, 8 (2) (2005) 135-152

174.     

Liu, Y., Wang, B., Yoshino, M., Roy, S., Lu, H., and R. Komanduri, “A Combined FEM/Nanoindentation Approach to Determine Material Properties of Single Crystal Copper Incorporating Mesoplastic Constitutive Model,” J of the Mechanics & Physics of Solids 53 (2005) 2718-2741

175.     

Agrawal, P.M., Raff, L. M., and R. Komanduri, ”Monte Carlo Simulations of Void-Nucleated Melting of Silicon via Modification in the Tersoff Potential Parameters,” Physical Review B 72 (2005) 125206-11

176.     

Raff., L. M., Malshe, M., Hagan, M., Doughan, D. I.l., Rockley, M. G., and R. Komanduri, “Ab initio Potential-Energy Surfaces for Complex, Multichannel Systems Using Modified Novelty Sampling and Feedforward Neural Networks,” J of Chemical Physics 122, 084104 (2005) 1-16

177.     

Komanduri, R., and Z. B. Hou, “Finite Element Analysis of High-Speed Machining of Some Difficult-to-Machine Materials,” NSF Annual Report, NSF Grantees Meeting, U of Arizona, Arizona (2005)

178.     

Komanduri, R., Raff, L. M., Hagan, M., and M. Malshe, “AIMD: A Novel Approach for the Development of Accurate ab initio Potential-Energy Surfaces for Atomistic Simulations,” NSF Annual Report, NSF Grantees Meeting, U of Arizona, Arizona (2005)

179.     

Singh, D.K., Jain, V.K., Raghuram, V., and R. Komanduri, “Analysis of Surface Texture Generated by a Flexible Magnetic Brush,” Wear 259 (2005)1254-61

180.     

Agrawal, P. M., Samadh, A. N. A., Raff, L. M., Hagan, M. T., Bukkapatnam, S. T., and R. Komanduri, “Prediction of MD Simulation Results Using Feedforward Neural Networks: Reaction of C2 Dimer with an Activated Diamond (100) Surface,” J of Chemical Physics 123 (2005) 224711-1 to 8

181.     

Lih, W-C. and Ranga Komanduri,” Neural Network and ANFIS Models of MRR and WIWNU in CMP Process using Sparse Experimental Data,” 3^rd Progress Report to Micron Foundation (2005)

182.     

Lih, W-C., Verghese, S. and R. Komanduri, “Modeling and Optimization of Chemical Mechanical Planarization (CMP),” 4th Progress Report to Micron Foundation (2005)

183.     

Bukkapatnam, S.T. S., Rao, P., and R. Komanduri, “Sensor-based Modeling and Monitoring of Surface Quality in a Lapping Process Using a Nonlinear Stochastic Model,” (submitted for publication) 2005

184.     

Chandrasekaran, N. and Komanduri, R., “Stress Induced Chatter-Scratch Generation in Chemical Mechanical Planarization,” (2005)

185.     

Ma, J., Lu, H. Wang, B. Hornung, R., Wissink, A., and R. Komanduri,“Multiscale Simulation Using  Generalized Interpolation Material Point (GIMP) Method and Molecular Dynamics (MD),” Computer Modeling in Engineering Sciences, 14, No. 2 (2006) 101-117

186.     

Umehara, N., Kirtane, T., Gerlick, R., Jain, V. K., and R. Komanduri, “A New Apparatus for Finishing Large Size/Large Batch Silicon Nitride (Si3N4) Balls for Hybrid Bearing Applications by Magnetic Float Polishing (MFP),” Int. J of Machine Tools and Manufacturing 46 (2006) 151-169

187.     

Doughan, D. I., Raff, L. M., Rockley, M. G., Hagan, M., P. M. Agrawal, and R. Komanduri, “Theoretical investigation of the Dissociation Dynamics of Vibrationally-Excited Vinyl Bromide on an ab initio Potential-Energy Surface Obtained Using Modified Novelty Sampling and Feedforward Neural Networks,” J of Chemical Physics 124 (2006) 054321-1 to 17

188.     

Lu, H., Wang, B., Daphalapurkar, N. P., Roy, S., and R. Komanduri, “Multiscale Simulation from Atomistic-Continuum – Coupling Molecular Dynamics (MD) with Material Point Method,” Philosophical Magazine 86, No. 20 (2006) 2971-2994

189.     

Jin Ma, H. Lu., R. Komanduri, ”Structured Mesh Refinement in Generalized Interpolation Material Point (GIMP) Method for Simulation of Dynamic Problems,” Computer Modeling in Engineering & Sciences (CMES) 12, No. 3 (2006) 213-227

190.     

Agrawal, P.M., Sudalayandi, B. S.,  Raff, L. M., and R. Komanduri, “A Comparison of Different Methods of Young’s Modulus Determination of Single Wall Carbon Nanotubes (SWCNT) Using Molecular Dynamics (MD) Simulations,” Computational Materials Science 38 (2006) 271-281

191.     

Narulkar, R., Agrawal, P. M., Raff, L. M., and R. Komanduri, “A New Approach to MD Simulations of Nanoindentation of Single-Crystal Aluminum,” (submitted for publication) (2006)

192.     

Bukkapatnam, S.T., S., Lih, When-Chen, Rao, Prahalada, Chandrasekaran, Naga, and Ranga Komanduri, “Analysis of MRR and WIWNU in Oxide CMP Using Sparse Experimental Data,” Proc. of the CMP-MIC Conference, 2006

193.     

Raff., L. M., Doughen, D. I. , Rockley, M.G., Hagan, M., Bukkapatnam, S., Agrawal, P. M., Malshe, M., and R. Komanduri, “Optimization of Feed-Forward Neural Networks for Fitting Potentiall-Energy Databases Obtained from Ab Initio Electronic Structure Calculations,” (submitted for publication) (2006)

194.     

Komanduri, R., “Microfabrication of Miniaturized Products: An Overview,” (Invited review article submitted for publication) Int. Journal of Manufacturing Technology and Management (2006)

195.     

Ma, J., Lu, H., Hanan, J., and R. Komanduri, “Simulation of the Deformation Mechanisms and Failure of Bulk Metallic glass (BMG) Foam Using the Generalized Interpolation Material Point (GIMP) Method,” (under review) 2006

196.     

Ma, J., Liu, Y., Lu, H., and R. Komanduri, “Multiscale Simulation of Nanoindentation Using the Generalized Interpolation Material Point (GIMP) Method, Dislocation Dynamics (DD) and Molecular Dynamics (MD),”Computer Modeling in Engineering & Sciences (CMES), 16, No. 1 (2006) 41-56

197.     

Agrawal, P. M., Raff., L. M., Hagan, M., and R. Komanduri, “Molecular Dynamics Investigations of the Dissociation of SiO2 on an ab initio Potential Energy Surface Obtained Using Neural Network Methods,” J of Chemical Physics 124 (2006) 13406-1 to 8

198.     

Bukkapatnam, S., Malshe, M., Agrawal, P. M., Raff., L. M., and R. Komanduri, “Parametrization of Interatomic Potential Functions Using a Genetic Algorithm Accelerated with a Neural Network,” Physical Review B 74 (2006) 224102-1 to12

199.     

Komanduri, R., “Microfabrication of Miniaturized Products,” Amitabha Bhattacharya Memorial Lecture,” Keynote Address at the First International & 22^nd All India Manufacturing Technology Design and Research Conference, Indian Institute of Technology, Roorkee, India, 21^st to 23^rd December, 2006

200.     

Komanduri, R., Raff, L. M., and M. Hagan, A Robust and Efficient Approach for the Development of Accurate ab initio Potential Energy Surfaces for Atomistic Simulations of MEMS Applications, Proc. of the NSF Design, Service, and Manufacturing Grantees Research Conference, St. Louis, MO, 2006

201.     

Daphalapurkar, Nitin, P., Lu, Hongbing, Coker, Demir, and Ranga Komanduri, “Dynamic Crack growth Simulation Using the Generalized Interpolation Material Point (GIMP) Method,” Int. J of Fracture 143 (2007) 79-102

202.     

Bukkapatnam, S.T., Rao, Prahalada, K., Lih, W-C., Chandrasekaran, N., and R. Komanduri, “Process Characterization and Statistical Analysis of Oxide CMP on a Silicon Wafer with Sparse Data," Applied Physics A 88 (2007) 785-792

203.     

Yang, H., Bukkapatnam, S., and R. Komanduri, “Nonlinear Adaptive Wavelet Analysis of Electrocardiogram Signals,” Physical Review E 76, 1 (2007)

204.     

Jha, S., V. K. Jain, and R. Komanduri, “Effect of Extrusion Pressure and Number of Finishing Cycles on the Surface Roughness in Magnetorheological Abrasive Flow Finishing (MRAFF) Process,” Int. J of Adv. Manufacturing Technology 33 (2007) 725-729

205.     

Bukkapatnam, S., Rao, P., Chandrasekaran, N.,and R. Komanduri, “Experimental Nonlinear Dynamics Characterization and Monitoring of Chemical Mechanical Planarization (CMP) Process,” 2007

206.     

Liu, Y., Lu, H., and R. Komanduri,, “Finite Element Analysis of Orthogonal Metal Cutting Incorporating Johnson-Cook’s Plasticity Model and Sticking-sliding Friction on the Tool Face,” (to be submitted for publication) 2007

207.     

Komanduri, R., Lu, H., Samit Roy, and L. M. Raff, “Multiscale Modeling and simulation of Material Processing,” Final Performance Report, DEPSCoR Project (F46920-03-1-0281) 2006

208.     

Malshe, M., Raff, L. M., Rockley, M. G., Hagan, M., P. M. Agrawal, and R. Komanduri, “Theoretical investigation of the Dissociation Dynamics of Vibrationally-Excited Vinyl Bromide on an ab initio Potential-Energy Surface Obtained Using Modified Novelty Sampling and Feedforward Neural Networks II Numerical Application of the Method,” J of Chemical Physics 127 (2007) 134105-1 to 7

209.     

Yang, H., Bukkapatnam, S., and R. Komanduri, “Nonlinear Adaptive Wavelet Analysis of Electrocardiogram Signals,” Physical Review E 76, 1 (2007)

210.     

Liu, Y., Varghese, S., Ma, MJ.,. Yoshino, M., Lu, H., and R. Komanduri, “Orientation Effects in Nanoindentation of Single Crystal Copper,” Int. J of Plasticity 24, No. 11 (2008)1990-2015

211.     

Lih, When-Chen, Bukkapatnam, Satish, Rao, Prahalada, Chandrasekaran, Naga,and Ranga Komanduri, “Adaptive Neuro-Fuzzy Inference System Modeling of MRR and WIWNU in CMP Process using Sparse Experimental Data,” IEEE Trans. on Automation Science and Engineering, 5, No. 1 (2008) 71-83

212.     

Agrawal, P. M., Sudalayandi,B. S., Raff, L. M., and R. Komanduri, “Molecular Dynamics (MD) Simulations of the Dependence of C–C Bond Lengths and Bond Angles on the Tensile Strain in Single-wall Carbon Nanotubes (SWCNT),” Computational Materials Science, 41 (2008) 450-456

213.     

R. Narulkar, S. Bukkapatnam, L. M. Raff, and R. Komanduri, “Molecular Dynamics (MD) Simulations of Diffusion of Diamond into Iron,” Philosophical Magazine 88 (2008) 1259-1275

214.     

U. Phatak, S. Bukkapatnam, J. Kong, and R. Komanduri, ”Sensor-Based Modeling of Slurry Chemistry Effects on the Material Removal Rate (MRR) in CMP Process,” Int. J of Machine Tools and Manufacture 49 (2008) 171-182

215.     

Bukkapatnam, S, Rao, P., and R. Komanduri, “Experimental Dynamics Characterization and Monitoring of MRR in Oxide Chemical Mechanical Planarization (CMP) Process,” Int. J. of Machine Tools and Manufacture, 48 (2008) 1375-1386

216.     

Malshe, M., Narulkar, R., Raff, L. M., Hagan, M., Bukkapatnam, S., and R. Komanduri, “Parameterization of Analytic Interatomic Potential Functions Using Neural Networks (NN),” J of Chemical Physics 129 (2008) 044111-1 to -9

217.     

Bukkapatnam, S., Komanduri, R., Yang, H., Lih, W., Malse, M., Rao, P., Raff, L.M., Benjamin, B., and M. Rockley, “Classification of Atrial Fibrilation (AF) Episodes from Sparse Electrocardiogram Data, EKG Signals,” J of Electrocardiology 41 (2008) 290-299

218.     

Pukrittayakamee, A., Hagan, M., Raff, L. M., Bukkapatnam, S., and R. Komanduri, “Fitting a Function and Its Derivative,” in Intelligent Engineering Systems through Artificial Neural Networks (ANNIE 2007) (November 2007)

219.     

R. Narulkar, S. Bukkapatnam, L. M. Raff, and R. Komanduri, “Graphitization as a Precursor for Wear of Diamond in Machining Iron: A Molecular Dynamics (MD) Investigation,” Computational Materials Science 45 (2009) 358-366

220.     

Agrawal, P. M., Malshe, M., Narulkar, R., Raff, L. M., Hagan, M., Bukkapatnam, S., and R. Komanduri, “A Self-starting Method for Obtaining Analytical Potential-Energy Surfaces from Ab Initio Electronic Structure Calculations,“ J of Physical Chemistry A 113 (2009) 869-877

221.     

Yang, H., Bukkapatnam, S., Benjamin, B., and R. Komanduri, “Dynamic Vectorcardiogram (VCG) Signal Representation, Part I Methodology,” (submitted for publication) (2009)

222.     

Yang, H., Bukkapatnam, S., Benjamin, B., and R. Komanduri, “Dynamic Vectorcardiogram (VCG) Signal Representation, Part II Applications,” (submitted for publication) (2009)

223.     

Dawson, D., Hui Yang, Malshe, M., Bukkapatnam, S., Komanduri, R., and B. Benjamin, “Linear Affine Transformation Between 3-lead (Frank XYZ leads) Vectorcardiogram (VCG) and 12-lead Electrocardiogram (ECG) Signals),” J of Electrocardiology 42 (2009) 622-630

224.     

Malshe, M., Narulkar, R., Raff, L. M., Hagan, M., Bukkapatnam, S., Agrawal, P. M., and R. Komanduri, “Development of Generalized Potential-Energy Surfaces Using Many-body Expansions and Neural Networks, a Moiety Energy Approximations,” J of Chemical Physics 130 (2009) 184102-1 to 9

225.     

Pukrittayakamee, A., Malshe, M.,  Hagan, M., Raff, L. M., Narulkar, R., Bukkapatnam, S., and R. Komanduri, “Simultaneous Fitting of a Potential-Energy Surface and Its Corresponding Force Fields Using Feedforward Neural Networks (NN),” Journal of Chemical Physics 130 (2009) 134101-1 to 10

226.     

Pukrittayakamee, A., Hagan, M., Raff, L. M., Bukkapatnam, S., Malshe, M., and R. Komanduri, “ A Practical Neural Network Training Algorithm for Fitting a Function and its Derivative,” (submitted for publication) Transactions of the IEEE (2009)

227.     

Pukrittayakamee, A., Hagan, M., Raff, L. M., Bukkapatnam, S., and R. Komanduri, “A Network Pruning Algorithm for Combined Function and Derivative Approximations,” International Joint Conference on Neural Networks, 2009

228.     

Pukrittayakamee, A., Hagan, M., Raff, L. M., Bukkapatnam, S., Malshe, M., and R. Komanduri, “A Practical Neural Network Training Algorithm for Fitting a Function and its Derivatives,” (submitted for publication) IEEE (2009)

229.     

Komanduri, R., Raff, L. M., and M. T. Hagan “Development of Generalized Potential Energy Surfaces (GPES) Using Many-body Expansions and Neural Networks, and Moiety Energy (ME) Approximations,” Proceedings of the 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June 23-25, 2009

230.     

Komanduri, R., Bukkapatnam, S., and Z. B. Hou, “Heterogeneous Sensing and Modeling of Chemical-Mechanical Interactions in Chemical Mechanical Planarization Process for Microelectronic applications,” Proceedings of the 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June 23-25, 2009

231.     

Malshe, M., Narulkar, R., Raff, L. M., Hagan, M., Bukkapatnam, S., and R. Komanduri, “Accurate Prediction of Higher-level Electronic Structure Energies for Large Databases Using Neural Networks, HF Energies, and Small Subsets of the Database,” J of Chemical Physics 131 (2009) 124123-1 to 12

232.     

Komanduri, R. and Zhen Bing Hou, “Unified Approach and Interactive Program for Thermal Analysis of Various Manufacturing Processes with Application to Machining,” Machining Science and Technology 13 (2009) 143-176

233.     

Obikawa, T., Postek, M. T., Dornfeld, D., Liu, R., Komanduri, R., Guo, Y., Shi, J., Cao, J., Zhou, J., Yang, X and X. Li, “Micro/Nano-Technology Applications for Manufacturing Systems and Processes,” (MSEC 2009 State-of-Art Paper) Proc of the ASME 2009 International Manufacturing Science and Engineering Conference, October 4-7, 2009, West Lafayette, IN, pp 1-23

234.     

Kong, Z, Oztekin, A., Beyca, O., Pathak, U., Bukkapatnam, S. T., and R. Komanduri, “Process Performance Prediction for Chemical Mechanical Planarization (CMP) by Integration of Nonlinear Bayesian Analysis and Statistical Modeling,” IEEE Transactions on Semiconductor Manufacturing 23, No. 2, May 2010

235.     

Jain, V. K., Ranjan, P., Suri, V. K., and R. Komanduri, “Chemo-Mechanical Magneto-Rheological Finishing (CMMRF) of Silicon for Microelectronics Applications,” Annals of CIRP 59 (2010)

236.     

Pukrittayakamee, A., Hagan, M., Raff, L. M., Bukkapatnam, S., and R. Komanduri, “ A Practical Training Algorithm Framework for Fitting a Function and and its Derivative,” (submitted for publication) Transactions of the IEEE (2010)

237.     

Malshe, M., Raff, L. M., Hagan,M., Bukkapatnam, S., and R. Komanduri, “Input Vector Optimization of Feed-Forward Neural Networks for Fitting ab initio Potential-energy database,” (submitted) J of Chemical Physics (2010)

238.     

Komanduri, R., “Cutting Temperature and Frictional Effects,” Invited article, Encyclopedia of Tribology (2010)

239.     

Agrawal, P. M., Narulkar, R., Bukkapatnam, S., Raff, L. M., and R. Komanduri, “A Phenomenological Model of Polishing of Silicon with Diamond Abrasive,” Tribology International 43 (2010) 100-107

240.     

Kong, Z, Oztekin, A., Beyca, O., Bukkapatnam, S. T., and R. Komanduri, “Nonlinear Sequential Bayesian Analysis-based Decision Making for End-Point Detection of Chemical Mechanical Planarization (CMP) Process,” (submitted for publication) 2010

241.     

Komanduri, R., Varghese, S., and N. Chandrasekaran, “On the Mechanism of Material Removal at the Nanoscale by Cutting,” Wear 269 (2010) 224-228

242.     

Hui Yang, Bukkapatnam, S., and R. Komanduri, R., “An Alternate Approach for the Identification of Cardiovascular Disorders Using Spatial Dynamics,” (submitted for publication) 2010

243.     

Trung Q. Le, Satish T. S. Bukkapatnam, and R. Komanduri, “Real-time Modeling of Cardiovascular Dynamics Using Electrocardiogram-based Activation Functions,” Proc. Of the 2010 Industrial Engineering Research Conference, A. Johnson and J. Miller (editors) 2010

244.     

Sarangan, V., Kunthong, J., Cai.,X., Bukkapatnam, S. T. S., Komanduri, R., and J. Volakis, “A low-cost Small-footprint Wireless Sensor for Container Integrity Monitoring,” Sensor, Mesh and Ad Hoc Communications and Networks, 2009. SECON '09. 6th Annual IEEE Communications Society Conference (22-26, June 2009)

245.     

Luo, H., Lu, H., Cooper, W. L., and R. Komanduri, “Dynamic Compaction of Dry Sand Under Confinement at High Strain Rates,” (submitted for publication) 2010

246.     

Daphalapurkar, N. P., Wang, F., Fu, Boshen, Lu, H., and R. Komanduri, “Determination of Mechanical Properties of Sand Grains by Nanoindentation,” Experimental Mechanics, DOI 10.1007/s 11340-010-9373-z (2010)

247.     

Le, T. Q., Bukkapatnam, S.T.S., and R. Komanduri, “Real-time Modeling of Cardiovascular Dynamics Using Electrocardiogram-based Activation Functions,” Editors: A. Johnson and J. Miller, Proc. of 2010 Industrial Engineering Research Conferences, 2010

248.     

Yang, H., Bukkapatnam, S.T.S., Le, T., and R. Komanduri, “Identification of Myocadial Infarction (MI) Using Spatio-temporal Heart Dynamics,” (submitted for publication) 2011